A completely automatic solar-powered sign light. Simply turn it on and attach it to any type of sign. When the sun sets in the evening, the solar lights will automatically activate and stay lit for hours. In the morning, the daylight sensor will automatically shut down and the unit will begin recharging for the next evening. Your latest listing will stay visible overnight!

A sign is only valuable when visible. At night, your sign does nothing for you. A large segment of the public will leave their home in the dark early morning hours and then return after the sun has set. This segment increases exponentially during the fall and winter months when the sun sets around 4:30 p.m. throughout the country. With these solar lights, your sign will be noticed day and night, creating more opportunities for real estate listing or business to get noticed.

The solar light is not a spotlight, it does not flash and it does not change colors. It casts a gentle glow over the face of the sign which complies with the Department of Transportation, city ordinances, and most homeowners associations.

Never. Each solar light contains a self-charging lithium-ion battery. In the morning, the daylight sensor will automatically shut down the solar light and the unit will begin recharging for the next evening.

Each unit is a solar-powered device and gets its power from the sun. In the event that during the day direct sunlight does not come in contact with the solar cells located on the top of the unit, the overall light output for that evening will be adversely affected. This is standard for all solar-powered devices.

Each solar light is 12-inches long, 1-inch tall, and 1.25-inches wide.

Each solar light arrives with 3M™ Command™ Outdoor Strips attached. Before installing, be sure the surface that you are attaching to is clean, flat, and dry. Simply peel the backer film away from the 3M™ Command™ Strips to expose their adhesive and press and hold firmly in place for 30 seconds. That’s it! Your solar light is now secure and fully functioning.

If your desired location is susceptible to theft, it may be better to install the unit with screws or plastic zip ties (sold separately) which require a tool to remove.

Each solar light comes partially charged and ready to use. On the bottom side of the light, you will find a weatherproof toggle switch. Before installing the light, slide the switch from "Storage Mode" to "Active Mode." If you are in a well-lit area, the solar light will NOT turn on. This is because the solar panel on the top of each unit contains a daylight sensor. To test your device, cover the sensor (or move to a dark location) and the lights will instantly turn on.

Yes! When moving to another location, hold the solar lights firmly while pulling each 3M™ Command™ Outdoor Strip straight down. Never pull the strip towards you. The strip will stretch a few inches and then release. Each solar light comes with one set of 3M™ Command™ Strips attached. To attach the light to another sign, you will need to purchase additional 3M™ Command™ Outdoor Refill Strips which are available online and at most big box stores.

Each solar light unit goes through a rigorous quality control process. The enclosure is watertight and impervious to moisture and dust. It is made from strong ABS plastic with UV additives so direct sunlight will not cause it to crack or fade over time.

Most orders ship in 2 business days or less.

Each solar light is 12-inches long. To light up an extra wide sign, simply place multiple units side by side. For best results, we suggest leaving two inches between each unit. For example, to light an 8' x 4' sign, we recommend using a total of seven lights to evenly cover the entire area with light.